If you've ever thought, "Surely I can use this Bluetti to run more than just my fridge," you're not alone. Connecting your portable power station to your home setup is totally doable—but only if it's done properly and safely. Let's break down your options in a way that's practical, legal, and won't leave you with a tripped breaker or worse.
Not sure which power station is right for you?
Take the quiz!
We're giving you the rundown on what's possible—but we're not replacing a licensed sparky. Think of this as your planning sheet, not an instruction manual.
Any hardwiring of your Bluetti into your home's switchboard or power circuits must be done by a licensed professional. Not just because it's smart—but because it's the law in Australia.
Backfeeding power (e.g., plugging your Bluetti into a wall socket) is a massive no-go. It puts utility workers at risk and can start fires or wreck your gear.

Your Bluetti acts as a completely separate power source. You run extension cords directly from the Bluetti to the essential appliances you want to power—no modification to your home's wiring required.
Start with a full charge to ensure maximum runtime. If using solar panels, top it up during daylight hours.
Think fridge, modem, lights, phone chargers—not the spa bath. For more on what a Bluetti can handle, see can a Bluetti power a refrigerator.
Make sure they're rated to handle the load, especially if powering a fridge or other inductive appliance.
Double-check the wattage of everything you're running to avoid overload.
Don't exceed your Bluetti's continuous output rating. Most models will beep or shut down if overloaded.
It's simple, safe, and doesn't require any electrical modification. Perfect for renters or temporary use during blackouts.
You'll be limited to powering only what's within reach of your cords. It can also look a bit messy if you're powering multiple devices at once.

This device safely disconnects your home from the grid before connecting it to the Bluetti. That way, you avoid backfeeding and safely power selected circuits in your home.
This is usually near your main switchboard, wired to a few essential circuits (e.g., fridge, some lights, GPOs).
Then you plug your Bluetti into the inlet box using a properly rated generator cord.
Just make sure the model you're using has the capacity and surge rating to match the connected loads. Not sure which model suits your needs? Check out what size Bluetti do I need.
It's tidy, safer, and can power fixed appliances like ceiling lights or hardwired fans—things you can't plug in directly.
It's more expensive upfront and requires a licensed electrician. Not all Bluetti models are suited to this kind of setup.

There's more than one way to use your Bluetti to power your home—but not all methods are created equal. If you're just after blackout protection for a few basics, go the extension cord route. Want a neater, semi-permanent option? Then it's time to bring in a licensed electrician and look at a transfer switch.
Whatever you do, don't risk safety to save a buck. Done right, your Bluetti can be a reliable backup that keeps your home humming when the grid goes quiet.