BLUETTI Display 1 Magnetic Screen for Power Stations | 2,000mAh
Not sure which model?
SMALL AUSSIE BUSINESS
Chat direct to the owner
POWER STATION SPECIALISTS
Let us find your perfect model and size
100 DAY RETURNS
Change your mind? No Dramas.
The Owner's Insights on the Display 1
Most power stations tell you very little from across your kitchen. A few LEDs, or a screen you have to crouch down to read yourself. That's fine until you actually want to know what's going on.
The Display 1 fixes that. It's a small black LCD, 110 x 77 x 15mm and 155g. It sticks to your fridge door on the supplied metal plate or stands on a bench. It talks to your power station over Bluetooth.
One screen gives you your charge percentage, watts in, watts out, time remaining, plus icons for outage alerts, charging mode and weather warnings.
The part people miss is that it isn't only for the FridgePower. It pairs with your Apex, Elite, Premium and AC240 units too. If your unit lives in a cupboard or on top of a tall fridge, this is what makes it usable day to day.
What Customers Say About the Display 1
Reviewers who tested it alongside the FridgePower rate it as the accessory worth having, particularly when the unit is mounted somewhere awkward.
The at-a-glance layout gets the praise. Charge level, power in and out, and the room readings all sit on one screen without touching anything.
One consistent niggle: the remaining time figure assumes a steady load, and a fridge cycles on and off. Treat it as a guide rather than a countdown.
Why You'll Love the Display 1
- Works across six Bluetti series. FridgePower, Apex, Elite, Premium, AC240 and Balco all pair with it, so it moves with the rest of your gear.
- Magnetic mounting. It sticks to your fridge on the supplied metal plate, or flips out a kickstand on the bench.
- One screen, everything on it. Charge percentage, input watts, output watts and time remaining, without opening your phone.
- 2,000mAh battery. Over 24 hours flat out, about three months in normal use, and up to a year on standby.
- Six-second pairing. Tap to wake, hold for six seconds, add it in your app. That's the whole setup.
- 155g and 15mm thin. It's a fridge magnet, near enough. Nothing to install and nothing to wire in.
Why You Should Consider a Bluetti Accessory
Bluetti builds their accessories to pair with the units rather than as generic add-ons. The Display 1 talks straight to your power station over Bluetooth, follows its screen timeout, and gets the same Australian warranty support the power stations do.
Display 1 Specifications
| Display Type | LCD |
| Dimensions | 110 x 77 x 15mm |
| Weight | 155g |
| Battery Capacity | 2,000mAh |
| Battery Life | 24 hours-plus continuous, around 3 months normal use, up to 1 year on standby |
| Charging | USB-C, cable supplied |
| Connection | Bluetooth, one unit at a time |
| Compatible Series | FridgePower, Apex, Elite, Premium, AC240, Balco |
| Pairing | Tap to wake, hold 6 seconds, add in the Bluetti app |
| Mounting | Magnetic via supplied metal plate, adhesive, or fold-out kickstand |
| Readings Shown | State of charge, input watts, output watts, remaining charge or discharge time, temperature, humidity, time |
| Status Icons | Weather alert, AC offline, outage count, energy savings, backup mode, ECO mode, silent charging, turbo charging, power lifting, alarm |
| Operating Temperature | 0°C to 40°C |
| Storage Temperature | -20°C to 40°C |
| Colour | Black |
| Warranty | TBC, confirm with Bluetti Australia |
Which Bluetti power stations work with the Display 1?
Six series in total: FridgePower, Apex, Elite, Premium, AC240 and Balco. From our range that covers the FridgePower, the Apex 300, the Elite 320 and Elite 400, and the Premium 100 V2 and Premium 200 V2. Odds are your unit is on that list.
It pairs to one of your units at a time over Bluetooth. If you run more than one, you'll re-pair to switch which one it's watching. Pairing takes about six seconds and lives in the Bluetti app.
How long does the Display 1 battery last?
There's a 2,000mAh cell inside and you charge it over USB-C with the supplied cable. Bluetti rate it at 24 hours-plus running continuously, roughly three months on normal daily use, and up to a year if it just sits on standby.
So in practice you'll charge it a few times a year. You get no wiring, no adapter and nothing left plugged in, which is the point of it.
What's Included
- Display 1 magnetic screen
- Metal mounting plate
- USB-C charging cable
- User manual
What's Not Included
- A power station, required to pair
- USB power adapter for charging
- BlueCell 200 expansion battery
The Display 1 pairs with most of the Bluetti range, including the FridgePower and its BlueCell 200 expansion battery.
Not Sure If You Need One?
Buy the power station first and see how you go. If you find yourself squinting at LEDs or reaching for your phone every time you walk past, add the Display 1 then.
Worth being straight about: it's an optional extra, not a missing piece. Your unit works completely without it, and your Bluetti app is free and shows you more.
Where it earns its place is a unit you can't easily see, or a household where not everyone will bother installing your app. The full range sits in portable power stations. Questions on whether it suits your setup? Call the store on 03 7056 6732 and you'll get a straight answer.
Bluetti Display 1 Manual
Download the Display 1 user manual for pairing steps and full technical details.
